SERIES G 0.75-5.5kW 2P submersible sewage pump

General specifications

• Insulation class: F
• Protection class: IP68
• Water temperature: up to 40℃
• PH: 6 -10
• Liquid density: 1.3g/cm³
• Power supply: three-phase 380V±10%, 50Hz three-phase 380V±10%, 60Hz single-phase 220V±10%, 50Hz single-phase 220V±10%, 60Hz
• Motor protection: built-in
• Capacity: up to 25m³/h
• Head: up to 42m
• Cable length: 8m
• Maximum water depth: 10m
• Structure and characteristics

A grinding mechanism is provided at the suction end of the submersible pump. The suspended solids are cut into small pieces and pumped out by the vortex impeller without fear of clogging in the discharge pipe.

Applications
High pressure wastewater transfer in small-scale drainage systems
Transfer of domestic wastewater and building wastewater
Collection and transfer of wastewater in factories
Transfer of wastewater from wastewater tanks of hospitals, hotels, department stores, etc.
Pump of grinding treatment parts.

Refer to the table of construction materials below: